|
|
|
 |
 |
 |
The PBS120 is a low profile "Gas Injection" type packing support plate for use with random packings in columns smaller than 1000mm in diameter. The perforated beams are formed into plate sections sized to fit the vessel manways and bolt together inside the column. The standard perforation is suitable for use with packings of nominal size 25mm or larger and provide a total open area for vapour and liquid flow equivalent to about 85% of the column cross sectional area. |
 |
 |
The PBS260 is Distall's version of the industry standard "Gas Injection" type Packing Support Plate for columns larger than 1000mm internal diameter. The plate is made up from a number of standard perforated beam sections which can be installed through column manways (minimum manway size 450mm NB) and bolted together inside the column. |
|
|
 |
The
FSG75 is open flat grid type Packing Support Plate designed for use with
structured packing in columns larger than 750mm internal diameter. The plate
is made up in 375mm wide segmental sections which can be installed through
column manways (minimum manway size 450mm NB) and bolted together inside
the column. The standard design has grid bars spaced on 75mm centres but
variations with closer grid spacings can be manufactured to support random
packings where the support plate capacity is not critical. |
