As a progression from the widely used Dynavalve tray, the Dynafix was designed as an alternate device to the standard float valve tray. The Fixed Valve tray is manufactured by punching and forming integral valves over the tray deck at a set valve lift.

This design of tray gives the following benefits over the standard sieve and float valve trays.

• Wide range of efficient turndown.
• Anti fouling across the tray deck and walls of the vessel.
• Up to 3 times stronger decks.
• Higher Jet flood characteristics.
• Steady liquid movement across the tray deck.
• Enhanced vapour and liquid contact.
• Non moving or separate parts
• Low Cost.
• Easy tray retrofits

The Dynafix comes in Small Fixed Valve (SFV) or Mini Fixed Valve (MFV) depending on the duty required and is available in 3 valve heights.